How to Rebuild the Top End on a KFX
When we last left off with the KFX, we had just checked the ring gap and determined that the rings on the piston were wore out. Just as a reminder, this is a project that we worked on for a friend, it...
When we last left off with the KFX, we had just checked the ring gap and determined that the rings on the piston were wore out. Just as a reminder, this is a project that we worked on for a friend, it...
If you follow us on social media, you probably have a good idea about why we skipped our normal project post last week. With the weather getting warmer, we're getting more and more calls about services and repairs. We've seen...
*We're getting anxious for winter to be over. So instead of staring out the window at the snow, we thought it'd be nice to publish a post we never got around to last fall... We’re no strangers to DIY solutions....
It's been a long few weeks. While winter has hit a huge part of the country already, we're just getting back into our normal routine after a few long weeks of some unexpected downtime. And even though we're more excited...
Bleeding brakes is one of those tasks that is really simple, but can be a real pain if you don't do it correctly. There are ways to be a little more efficient by using a vacuum pump, but since most...
A few weeks ago, we did a giveaway with Clymer Manuals. This was our first giveaway, and we were excited by how much we got to interact with our readers. We got a lot of feedback following the giveaway and...
Don't worry, we didn't forget about Squeeze. The KFX we've been working on did. If you remember last week, we found that the timing is right on and that the valves are within spec. But the bugger still won't start....