Blog » Yamaha Grizzly 600

How to Quickly Replace Your ATV Brake Pads

February 17, 20151 comment

If you have the time, changing your own brake pads is a relatively simple process. This post might sound a little self-explanatory, but it's something we get a lot of questions about. Here we are replacing the rear brake pads on a 600 Yamaha Grizzly. First, let me jump on my...

How to Easily Bleed ATV Brakes

October 16, 20131 comment

Bleeding brakes is one of those tasks that is really simple, but can be a real pain if you don't do it correctly. There are ways to be a little more efficient by using a vacuum pump, but since most of us don't have an $80 vacuum lying around, we're...

Bad Timing (Chain)

August 15, 2013

A few weeks ago, we pulled the valve cover off our 600 Grizzly. (If you're just tuning in, that was no easy task. >Nearly every bolt had been stuck or rounded off.) Once we got the valve cover off, we found that there was a small amount of play in...

Can't Win for Losing (Part 2)

August 07, 2013

After fighting with some stuck bolts for a few hours, we decided to drill them out and rethread them. Good times all around.